Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Dryer Vent Cleaning Across Falls Church
Dryer vent cleaning in Falls Church typically costs $180-$340 for a standard single-family home, with rerouting or cap replacement adding $120-$280 depending on materials and access. Most jobs are completed in 90 minutes to two hours, and every visit includes a written price before work starts and a documented photo record when we leave. Call (240) 363-3380 for a free estimate.
We serve Falls Church from our Washington, DC scheduling office, with crews running daily routes through the city’s 2.2-square-mile footprint. That compact geography works in your favor - we know the difference between a 1950s Cape Cod off Broad Street and a teardown-rebuild near Tinner Hill, and we arrive prepared for what those homes actually contain. Our technicians carry rigid metal duct, vent caps with bird guards, and camera inspection gear on every truck, because Falls Church’s postwar housing stock rarely presents a textbook installation.
Why CleanRun Air Duct Cleaning Washington Is Falls Church’s Preferred Dryer Vent Cleaning Company
CleanRun has held the same practice since our first job in 2013: written price before any work starts, documented photo record of every duct run before and after, and the 365-Day Done Right Promise backed in writing on every job. Falls Church homeowners - many of whom bought into the city’s tight market between 2015 and 2025 at premium prices - tend to research thoroughly before calling. We built our process for exactly that customer.
Our Dryer Vent Cleaning in Falls Church crews are background-checked, uniformed, and identified by name before arrival under Haven Standard Clause 3: Verified Crews. We do not use day labor or subcontracted technicians. The equipment on every truck includes Rotobrush agitation systems and Abatement Technologies negative-pressure extractors - brands you can verify independently before you agree to a price.
We publish our license number on every page, not buried in a footer. Our Washington, DC office dispatches crews to Falls Church daily, and our live-answer phone is staffed around the clock. If you have a competitor’s written estimate, we provide a Free Second Opinion at no cost - we put our number next to theirs, both in writing, before you decide.
Our Dryer Vent Cleaning Services in Falls Church

Dryer Vent Inspection
Every Falls Church job starts with a camera inspection of the full vent run, from the dryer’s transition duct to the exterior termination. In the city’s 1940s-1960s housing stock, we frequently find original galvanized runs or early flex that has been spliced, crushed, or disconnected in crawl spaces where no homeowner has looked in decades. The camera shows exactly what we’re dealing with - a 3-inch lint build-up at a low spot, a rusted flapper frozen shut, or a termination buried in mature landscaping - and that footage becomes part of your documented photo record. We do not quote blind.

Vent Cleaning
Our Dryer Vent Cleaning process uses mechanical agitation with Rotobrush equipment followed by negative-pressure extraction to remove lint and debris from the full run. In Falls Church’s humid summers, lint binds with moisture and particulates from the city’s dense oak and maple canopy, forming compacted deposits that simple air-washing won’t dislodge. We photograph the interior before and after every pass. The photo record is delivered as a standard deliverable, not an upsell.

Lint Removal
The visible lint at your dryer’s trap is typically 25-30% of the total accumulation. In Falls Church’s older homes, the remaining lint packs into low spots in crawl-space runs, elbows behind knee walls, and terminations hidden under decks or in soffits. We remove the full blockage, not just the accessible portion. If the run is crushed or disconnected, cleaning alone won’t solve the problem - we’ll show you the camera footage and quote the repair in writing before proceeding.

Vent Rerouting
Rerouting is often the real fix in Falls Church. Original flex runs through unconditioned crawl spaces sag, crush, and accumulate moisture. Teardown-rebuild homes frequently tie a newer addition’s dryer into an original undersized run through mismatched connections. We replace crushed or improperly routed flex with rigid metal duct sized to the dryer’s CFM rating, terminate it at a code-appropriate location, and seal all joints. A typical rerouting in Falls Church runs $220-$480 depending on linear feet and access.

Vent Cap Replacement
Falls Church’s mature landscaping and humid climate corrode flapper caps and trap lint in rusted housings. We replace failed caps with new vent terminations, including bird guard installation where the termination is exposed to the city’s dense tree canopy and nesting wildlife. Cap replacement with bird guard typically runs $85-$165 in Falls Church.

Bird Guard Installation
Homes near Falls Church’s mature canopy - particularly the older blocks off Broad Street and around West Falls Church - see regular bird and squirrel intrusion into unprotected vent terminations. A bird guard adds $45-$85 to a cap replacement and prevents nesting that can completely block airflow and create fire risk.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Falls Church
CleanRun stocks replacement components from Guardsman, Aprilaire, and Rotobrush on every Falls Church truck, which means most cap replacements and rerouting jobs are completed same visit without a parts run. We do not use hardware-store flex or universal-fit caps as permanent solutions. If your dryer is a Maytag, Whirlpool, LG, or Bosch, the vent connection specifications vary - we carry the transition fittings to match. Our technicians name the manufacturer and model of every component we install, and that information is recorded on your written scope of work.
Common Dryer Vent Cleaning Problems We See in Falls Church Homes

- Crushed or disconnected flex in crawl-space runs. The original early-flex vent in 1950s Cape Cods and split-levels frequently crushes behind knee walls or sags below floor joists where lint packs solid. The camera shows a blockage the homeowner didn’t know existed, and the visible lint at the trap is only a fraction of the problem.
- Hidden terminations under decks or in soffits. In Falls Church’s compact lots, exterior vent caps were often placed for builder convenience, not maintenance access. Terminations buried in mature shrubs or tucked under rear decks accumulate lint undetected until dry times spike or the high-limit thermostat starts tripping.
- Corroded flapper caps frozen open or shut. Northern Virginia’s humidity and freeze-thaw cycles rust out the thin metal flappers common on 1960s installations. A stuck-open cap lets rain and pollen into the run; stuck-shut, it traps heat and moisture that compounds lint accumulation.
- Mismatched connections in teardown-rebuild homes. Newer additions tied into original undersized vent runs create a lint pathway that clogs faster than code-designed modern systems. Homeowners with new dryers in these homes often assume the machine is at fault - it’s the vent.
Pricing for Dryer Vent Cleaning in Falls Church, VA
| Service | Typical Range in Falls Church |
|---|---|
| Standard vent cleaning (single-family, accessible run) | $180-$240 |
| Vent cleaning with camera inspection and photo record | $220-$290 |
| Vent rerouting with rigid metal replacement | $220-$480 |
| Vent cap replacement (standard flapper) | $85-$140 |
| Vent cap replacement with bird guard | $130-$225 |
| Bird guard installation on existing cap | $45-$85 |
These ranges reflect Falls Church’s housing stock - older homes with crawl-space access issues, mature landscaping around terminations, and the teardown-rebuild additions that complicate routing. Every job is quoted with a written price before work begins under Haven Standard Clause 1. No per-vent pricing. No coupon that balloons once the truck arrives. If we find a crushed run that requires rerouting, we show you the camera footage, quote the additional work in writing, and you approve it before we proceed. Call (240) 363-3380 for an exact quote - estimates are free.
We Also Serve Cities Near Falls Church

Our crews run daily routes through Arlington, Springfield, Alexandria, and Fairfax from the same Washington, DC dispatch office. Each city’s housing stock presents different patterns - Arlington’s high-rise conversions, Springfield’s 1970s colonials, Alexandria’s historic masonry - and our technicians are briefed on those differences before arrival. If you’re in a neighboring city and found this page, the same pricing structure and documentation standards apply.
Serving Falls Church, VA - Our Local Coverage Area
We’re based in the Falls Church area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Falls Church

We start with a camera inspection from both the dryer end and the exterior termination to locate crushed sections, disconnections, or low spots where lint has packed solid. If the run is intact, we use mechanical agitation and negative-pressure extraction to clear the full length; if the camera shows crushed or sagging flex, we quote rerouting with rigid metal in writing before proceeding. Call (240) 363-3380 to schedule - we’ll show you exactly what we’re dealing with before any work starts.
Humidity above 70% reduces the dryer’s ability to evaporate moisture, but a properly vented dryer should still complete a standard cycle - extended dry time almost always indicates restricted airflow from lint accumulation, a crushed run, or a failing termination. In Falls Church’s older homes, we frequently find the vent run is partially blocked and the humid air has nowhere to go. The fix is clearing the blockage and sealing the run, not buying a new dryer. Call (240) 363-3380 for a camera inspection and written quote.
If your termination is exposed to the mature tree canopy common in Falls Church’s older neighborhoods - particularly near West Falls Church or along the city’s oak-lined streets - a bird guard prevents nesting that can completely block airflow and create fire risk. We install bird guards as part of cap replacement or as an add-on to existing caps, and we verify the guard’s mesh size won’t trap lint. Call (240) 363-3380 and we’ll assess your termination location.
Yes. Teardown-rebuild and addition projects in Falls Church frequently tie the new dryer’s vent into the original undersized run through mismatched connections, creating a lint pathway that clogs faster than a code-designed modern system. The dryer may be new, but the vent is not. Our camera inspection identifies these mismatched tie-ins, and we quote rerouting to a properly sized, dedicated run if needed. Call (240) 363-3380 for a Free Second Opinion on any written estimate you’ve already received.
For Falls Church’s 1940s-1960s homes with original or early-flex runs, we recommend annual inspection and cleaning every 12-18 months - the combination of galvanized or flex duct in crawl spaces, heavy pollen from the mature canopy, and humid summers creates conditions that accelerate accumulation. Newer homes with properly installed rigid metal runs may extend to 24 months. The documented photo record from each visit lets you compare year over year and adjust the interval based on actual buildup, not a calendar guess. Call (240) 363-3380 to set up a schedule that matches your home’s real conditions.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Falls Church since 2013.




Before
After
Before
After