Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Reston
Most duct repair and sealing jobs in Reston run $280-$680 for a single-family or townhome system, with flex duct replacement in older cluster properties sometimes reaching $850-$1,400 if multiple runs are involved. We typically schedule within 3-5 business days and dispatch from our Washington, DC coordination office, with crews arriving in Reston equipped for the specific duct configurations common here.
We’ve worked in Reston since 2013, and the pattern is consistent. The planned-community housing stock - Lake Anne’s cluster homes, Hickory Cluster’s stacked townhomes, the garden condos along Baron Cameron Avenue - carries ductwork that doesn’t match what you’ll find in standard Fairfax County subdivisions. Original 1960s sheet-metal trunk lines retrofitted with 1980s flex duct. Shared chases in stacked units. Dryer vents that pass through walls the homeowner doesn’t own. Our Duct Repair & Sealing team documents every run before touching it, because in Reston the problem is rarely just dirt; it’s mismatched materials, degraded seals, and boundary lines between unit owner and HOA that have to be clarified before work starts.
Call (240) 363-3380. We’ll put a written price in your hand before any panel comes off.
Why CleanRun Air Duct Cleaning Washington Is Reston’s Preferred Duct Repair & Sealing Company
Reston homeowners research before they call. We built our process around that.
Every job starts with Haven Standard Clause 1: a written price delivered before work begins. No exceptions. In Reston, where cluster home and condo owners often need HOA coordination before we can access shared chases, that written scope becomes the document you show your management company. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. Tomas Reyes established this protocol in 2013, and it’s how we’ve served over 52,000 homes without a single “call for pricing” conversation.
Our photo record is standard, not optional. Before we touch a register in your Lake Anne cluster home or your Baron Cameron condo, we photograph the interior of every duct run. After sealing or repair, we photograph again. You receive both sets. In Reston’s older stock, where 1960s metal meets 1980s flex, those photos often reveal the real problem: sagging transitions that cleaning alone won’t fix.
The 365-Day Done Right Promise applies here exactly as it does everywhere we serve. If the work isn’t right, we make it right. In writing, not as a favor.
We also offer a Free Second Opinion on any written estimate from another Reston provider. Bring their number. We’ll put ours next to it.
Our Duct Repair & Sealing Services in Reston

Duct Sealing
Leakage at joints, plenum connections, and register boots wastes 20-30% of conditioned air in a typical Reston system. In the humid subtropical climate here, that leakage also pulls unfiltered attic and wall cavity air into your supply. We seal with Mastic Sealant - a water-based compound that remains flexible and is rated for the temperature cycling your Reston ducts see every summer. For metal-to-flex transitions in Hickory Cluster and Lake Anne homes, we apply Mastic Sealant at every joint, then verify with static pressure testing before we close the access panel.

Flex Duct Repair
This is where Reston’s housing stock diverges from standard Fairfax County work. The 1980s flex retrofits in original cluster communities weren’t sized or supported correctly. Sagging creates low spots where debris and moisture collect. Kinks choke airflow to second-floor registers. At a stacked cluster townhome off Hickory Cluster Drive, we ran a camera inspection and found the original 1960s sheet-metal trunk feeding a sagging 1980s flex run above the second-floor ceiling, with return-side leakage pulling canopy pollen and attic dust into the living space. We isolated the branch under negative pressure, performed source removal on both supply and return ducts, then rebuilt the transitions with Mastic Sealant and Guardsman flex connectors to restore static pressure at the air handler. The homeowner’s complaint of uneven upstairs cooling resolved the same day, and we logged the pre-existing flex retrofit in their HOA maintenance file.

Metal Duct Repair
The original 1960s galvanized steel trunk lines in Reston’s planned communities are thick-gauge and worth preserving. We see rust-through at the plenum connection, separated seams from decades of thermal expansion, and access holes cut by prior HVAC contractors that were never properly sealed. Our metal duct repair replaces damaged sections with matching gauge steel, seals with Mastic Sealant, and tests for leakage before we leave. In Reston’s garden condos along Sunset Hills Road, where a single trunk serves multiple units, this work often requires HOA scheduling coordination - something our dispatch team handles from the Washington, DC office.

Duct Insulation
Uninsulated or degraded duct wrap in Reston’s humid climate creates condensation on cool supply lines, particularly in crawl spaces and attic chases. That moisture degrades flex duct outer jackets and promotes mold growth on fiberglass insulation. We replace degraded insulation with foil-faced fiberglass or closed-cell foam where appropriate, sealed at all seams. In Reston’s older cluster homes with duct runs through unconditioned crawl spaces, this is often the repair that stops the cycle of repeated contamination.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Reston
Our equipment roster includes Rotobrush rotary brush systems for mechanical agitation in flex duct, Nikro negative-pressure extractors for source removal, and Guardsman flex connectors and fittings for transition rebuilds. We stock Guardsman components for Reston’s common flex-to-metal repair pattern, which reduces wait time when your Lake Anne or Hickory Cluster home needs a transition rebuilt rather than just cleaned. Abatement Technologies HEPA filtration runs on every job site. These are trade-recognized brands you can verify independently; we name them because the equipment matters as much as the technician operating it.
Common Duct Repair & Sealing Problems We See in Reston Homes

- 1960s metal trunk lines mated to 1980s flex retrofits. In Lake Anne and Hickory Cluster, this mismatch is predictable. The flex sags, traps debris at transition joints, and masks leaks until the blower motor strains against lost static pressure. Cleaning without sealing the transitions is temporary work.
- Dryer vents through shared common structure. In Reston’s garden condos and mid-rise towers near Reston Town Center, the lint pathway crosses walls the unit owner doesn’t control. This creates fire risk and an HOA-responsibility dispute that has to be clarified before work starts. We document the vent path and provide a written scope that defines what we can access and what requires management company coordination.
- Stacked townhome duct chases with incomplete sealing. A single unit’s sealing work is only half the system. Supply and return ducts shared with the unit above or below remain unsealed unless the management company coordinates access. We flag this in our written scope and photo record so the HOA has documentation for future coordinated work.
- Elevated pollen and mold loading from Reston’s forest canopy. The town’s founding design principle - dense oak-and-maple preservation - channels some of Fairfax County’s highest seasonal pollen concentrations directly into HVAC intakes. Combined with humid subtropical conditions, this accelerates particulate buildup and biological growth in ductwork, particularly in systems with return-side leakage pulling unfiltered air.
Pricing for Duct Repair & Sealing in Reston, VA
Here’s what duct repair and sealing costs in Reston’s market, based on the housing stock we actually work in:
| Service | Typical Range in Reston |
|---|---|
| Single register boot sealing (Mastic Sealant) | $180-$260 |
| Plenum-to-trunk resealing, metal duct | $280-$420 |
| Flex duct run replacement (single run, standard length) | $340-$520 |
| Multiple flex run replacement with transition rebuild | $680-$1,100 |
| Full system sealing with static pressure verification | $520-$850 |
| Dryer vent repair through common wall (HOA-coordinated) | $260-$480 |
These are whole-system prices, not per-vent teaser rates. What drives cost: accessibility (crawl space vs. finished basement), number of transition joints needing rebuild, whether HOA coordination adds scheduling complexity, and whether we find pre-existing damage - rusted metal, collapsed flex, or unsealed prior access holes - that wasn’t visible at estimate.
Every Reston job gets a written price before work starts, per Haven Standard Clause 1. Estimates are free. Call (240) 363-3380.
We Also Serve Cities Near Reston

Our crews work throughout Fairfax County and the immediate DC metro. If you’re in Reston, Herndon, Sterling, Fairfax, or Falls Church, the same written-price protocol and documented photo record apply. Dispatch and scheduling are coordinated from our Washington, DC office; crews serve all listed cities locally with equipment stocked for the region’s common duct configurations.
Serving Reston, VA - Our Local Coverage Area
We’re based in the Reston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Duct Repair & Sealing in Reston

Sealing can restore static pressure if the flex is intact, properly supported, and the sag is minor. In most Lake Anne and Hickory Cluster homes we inspect, the 1980s flex has degraded beyond sealing - the inner liner is porous, the insulation is compressed, and the sag has created permanent low spots. We photograph the condition, show you the evidence, and quote both options in writing. Replacement with supported flex and proper Guardsman transitions is usually the lasting repair. Call (240) 363-3380 and we’ll put a camera through before quoting.
Responsibility depends on your HOA governing documents, but the practical division is usually: you own the vent from your dryer to the wall penetration; the association owns the through-wall section and exterior termination. We document the full vent path with our camera, mark the transition point in your photo record, and provide a written scope that separates owner-accessible work from work requiring HOA coordination. Many Reston garden condo associations use our documentation to justify coordinated multi-unit dryer vent maintenance. Bring us your HOA’s written estimate; we’ll provide a Free Second Opinion.
Reston’s intentionally preserved heavy forest canopy - a founding design principle since 1964 - generates some of the highest seasonal pollen loads in Fairfax County. Combined with humid subtropical conditions that keep indoor relative humidity elevated for much of the year, and return-side leakage in aging ductwork, this creates a consistent intake of unfiltered biological material. Neighboring communities with less tree cover and newer construction don’t see the same concentration. The fix is sealing the return path, not just cleaning the supply. Call (240) 363-3380 for an inspection that identifies where your system is pulling unfiltered air.
Yes. High-rise work near Reston Town Center and the Silver Line stations uses contained negative-pressure extraction (Nikro portable HEPA units) and scheduled access through the building’s maintenance corridors. We coordinate with building management for after-hours or low-occupancy windows, seal the work zone with temporary barriers, and verify no pressure imbalance affects adjacent units before we leave. The 365-Day Done Right Promise covers this work exactly as it does single-family homes. Written scope and photo record included.
NADCA (National Air Duct Cleaners Association) standards require source removal - debris must be mechanically dislodged and extracted, not just blown around - plus containment of the work area and protection of the HVAC system during service. For Reston’s Lake Anne and Hickory Cluster properties, this means we use Rotobrush mechanical agitation with simultaneous Nikro negative-pressure extraction, seal the air handler during work, and deliver a post-service photo record of every duct run. NADCA doesn’t certify individual technicians; it publishes the standard that equipment and methods must meet. Our process exceeds those requirements, and we document the compliance in your job record. Call (240) 363-3380 to review the specific NADCA elements your HOA has requested.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Reston since 2013.




Before
After
Before
After